Knight Stabilizer V2 - scroll down for video
Also newly updated Wires! Check the pictures out!
This product is suitable for both 1.2mm (with shims) and 1.6mm PCBs.
It is a screw-in type stabilizer using a new silicone double injection mold.
Both the crown and housing are injection-treated at areas where the stem is in contact with the housing.
It is highly recommended to use it after lubing:
- Do not use Permatex, we highly recommend using Krytox 205g0
- Apply lubricant evenly and as thinly as possible to the space where the stem is inserted and the wall of the housing
Specifications:
- 10 sets of stem
- 10 sets of housing
- 10 screws
- 10 washers
- 4 x 2u wire
- 1 x 6.25u wire
- 1 x 7u wire
- 10 x Stabilizer shims