A redesigned PCB-mounted stabilizer built to eliminate wire play at its source. Its innovative pivot-based mechanism combines pivot rotation with wire sliding to prevent direct impact between the wire and stem, significantly reducing rattle, wobble, and unwanted noise while maintaining a smooth, consistent key feel.
The top-access screw-expansion retention clip combines the simplicity of clip-in mounting with the security of screw-in designs. Tightening the top-mounted support screw securely locks the stabilizer to the PCB—without metal hardware contacting the board or interfering with O-ring mounting.
Each stabilizer is factory-tuned and pre-lubed at the required contact points, so it’s ready to install straight out of the box.
Specifications:
- Mounting Style: PCB
- Retention System: Clip-in base with top-entry screw-expansion retention clip
- Lubrication: Factory tuned and pre-lubed
- Compatibility: Accessories included for different PCB thicknesses and layouts
- 4 × 2U, 1 × 6.25U, 1 × 7U
Accessories:
- PTFE Stabilizer Pads: Improve mounting stability
- 1.2 mm PCB Shims: For 1.2 mm PCBs with non-split stabilized key layouts.
- 1.2 mm PCB Shims for Split Layouts: For 1.2 mm PCBs with split stabilized key positions.
- Stabilizer Stem Spacers: For stabilized keys using switches with a total travel of 3.6 mm or less.
- Screws ×10
- Installation Screwdriver ×1