[Instock] Neo80 Kit

$246.00 SGD

運送 チェックアウト時に計算

Extra

  • 21
  • 22
  • 23
  • 24
  • 25

Description

Missed the Group Buy? Here's another chance to cop the Neo80!

Note:

  • Oxidation of brass and copper weights is unavoidable due to the characteristics of these materials. If you are concerned about this, please choose the PVD stainless steel weight instead.
  • Chroma and Dusk are random mixes of gradients, so the result on each unit may vary.
  • The tri-mode PCB on this sale page comes with a pair of 2200mAh batteries.
  • All PCBs are QMK-based and support VIA.
Extra 21 WK Anodized Babyblue Same as the top case Spray-coated White Weight Tri-mode Non-flex cut Hotswap PCB POM Plate
Extra 22 WK Spray-coated Cream Same as the top case Spray-coated White Weight Tri-mode Non-flex cut Hotswap PCB POM Plate
Extra 23 WK Anodized Champagne Same as the top case Spray-coated Golden Weight Tri-mode Non-flex cut Hotswap PCB POM Plate
Extra 24 WK Raw Same as the top case Copper Weight Tri-mode Non-flex cut Hotswap PCB POM Plate
Extra 25 WK Raw Same as the top case Mirror PVD Dusk Weight Tri-mode Non-flex cut Hotswap PCB POM Plate

Side & Back Design

The combination of curved edges and chamfers gives the Neo80 a softer and more dynamic side profile. The bottom case can be the same color as the top case, or customers can also choose a golden or silver bottom case to create a dual-tone vibe.

On the back side, we have maintained the minimalist style of the Neo family to balance the overall design and highlight the beauty of the materials.

In addition to the regular sandblasted and mirror-finished PVD, we have also experimented with the stone-washed technique for the first time on the Neo80. We offer three color options: stone-washed black, stone-washed silver, and stone-washed champagne.

Round Chamfer + F12 Top Row

In addition to the iconic slim side bezels, we have rounded the top case chamfer to give the Neo80 a softer appearance. The F13 key has been removed to make the layout more practical for everyday use.

RGB Orbit Logo

The RGB light is positioned slightly below the surface to reduce the brightness and make it less distracting during daily use.

WK & WKL Options

We offer both layouts so you can choose the one that suits you best.

Plateless, Gasket, O-ring, Sandwich, and more.

In addition to the regular plateless, gasket mount, and O-ring mount, we also experimented with an upgraded sandwich mount on the Neo80. In this configuration, the plate is placed on copper pillars that are attached to the bottom case, creating another channel for sound transmission. You can also combine multiple mounting styles to achieve the desired sound profile that best suits your preference.

5 Plate Options

Plates with distinctive characteristics:

  • Aluminum
  • FR4
  • Carbon Fiber
  • POM
  • PC

PCB Options

  • Tri-mode Hotswap PCB (Non-flex Cut)
  • Wired Hotswap PCB (Non-flex Cut)
  • Solder PCB (Non-flex Cut)

1.6mm PCB without flex cut to achieve a louder and fuller sound profile

NO Per-key RGB

QMK-based, VIA supported

NKRO

Polling rate: 1000Hz

Frequently Asked Questions

Specifications

Typing angle:6.5 degree

Front height:18 mm

Size:359.5mm * 141.7 mm

Weight:

  • with copper weight: 1.72kg before assembly, 2.22kg after assembly
  • with stainless steel weight: 1.7KG before assembly, 2.2kg after assembly
What does the kit contain?

1. Case

  • Including one pre-installed external weight
  • Including one pre-installed badge of your choice
  • One 3000 mAh batteries will be installed inside the bottom case for orders with Tri-mode PCBs
  • Orders with wired PCBs will receive fillers for the battery compartments

2. PCB

  • PCB of your choice
  • 1x PE sheet
  • 1x PCB foam
  • Standoffs
  • Tri-mode PCB comes with a 2.4Ghz dongle

3. Plate of your choice

4. Poron Case Foam

5. PCB Daughterboard*3 (pre-installed)

6. Silicone Gaskets

7. O-ring (30 duro)

8. Rubber feet

9. Weight screws in silver and black

10. Daughterboard FPC Cable

11. Free Gifts (Not covered by warranty)

  • Keyboard carrying case
  • 1x Keycap & switch puller
  • 1 set of 70% clip in stabilizers
  • Coiled USB-C cable
Can I build it plateless?

Yes, however, we only recommend building plateless with a solder PCB.

When will I receive my order?

Instock units will be shipped out in 2-3 working days.

Group Buy units will follow their respective estimated time of arrival.

Do extra Tri-mode PCBs come with battery?

No.